Augustin 7eac396a9b Fix G-code generation with priming, retraction, preheating; improve README ...

- Add proper preheating sequence (M140/M104/M190/M109)
- Add 60mm priming line before squares
- Add retraction (1mm) + prime (2mm) between each square
- Add configurable nozzle/bed temperatures via CLI
- Change default margin from 15mm to 20mm
- Add calibration_margin, square_size, nozzle_temp, bed_temp to config
- Rewrite README with comprehensive documentation (no emojis)
  - Detailed installation instructions
  - Step-by-step calibration workflow
  - All CLI commands with examples
  - Config file structure explanation
  - Troubleshooting section

Assisted-by: GLM-5 via Crush <crush@charm.land>

2026-02-20 14:55:27 +01:00

2.0 KiB

Raw Permalink Blame History

View Raw